Metal gates can easily rust. If they are left unsupervised and exposed to the elements, your gates will start to show signs of wear and tear.
They may not come as apparent as you imagine, but your gate is probably rusting from the inside out. The corrosive elements found in rain, snow, and even hot summer weather eat away at your gate’s paint and grime.
Your gate’s rust is two-fold: it’s eating away at the metal itself and leaving behind a trail of corrosive compounds that slowly eat away at your paintwork.
Rust is one of the most challenging home maintenance tasks you will ever undertake, but there are easy steps you can take to keep your gate looking like new again!
Get to Know Your Gate’s Surface Conditions
When keeping your gate looking new, the surface conditions are the first thing to check. If the gate is covered in puddles or looks a bit tattered, you need to examine the gate more closely.
If so, it’s time to work on the surface condition inside the gate. Start by washing the gate with soapy water.
Use a spot cleaner to eliminate any excess dirt or rust scale. If you’re unsure where to store your gate, a basement or an outdoor shed are ideal.
Next, use mild steel wool to remove any remaining spots. Be careful not to scratch the gate’s surface, leading to deeper marks. If your gate is painted, clean any chips or scratches away before painting.
Finally, use a wire brush to get rid of any remaining build-up of dirt and excess metal from the gate’s edges.
Wash your gate with soap and water
Even though you washed your gate with water, it’s important not to let the water run into the joints and chinks in your gate’s frame. It will cause dampness and will make the paintwork look shabby.
Instead, line the bottom of your hose with a wet cloth and wring the water out of the gate. Gently wipe the gate surface with paper towels to remove excess moisture when the water is gone. It will help to prevent rust and prolong the life of your gate.
Don’t Let Weather Deteriorate Your Gate’s Paint.
If your gate is getting a bit tattered around the edges, it’s probably time to give it a once-over with a paint-stripper.
These tools are specially designed to remove paint and grime from metal and plastic surfaces. If you have a painted gate, the first thing to do is remove any excess liquid from the paint with mild steel wool. If your gate is iron, the liquid could be lead or acid.
If acid, you need to call a paint- stripper immediately. While lead is a bit trickier to remove, it’s doable. If you’re unsure where to store your gate, a basement or an outdoor shed are ideal.
If your gate is brass, the liquid could be zinc. If your gate is zinc, it’s best to call a professional painter. Unfortunately, the excess liquid and dirt will simply get washed away using steel wool if you have a painted gate.
Don’t Forget the Old Paint!
If you’re experiencing rust issues on your gate but have been keeping up with the maintenance on your painting, it’s time to clean it up. The first move is to eliminate all traces of old paint from around your gate. Use mild steel wool to remove any remaining paint from around your gate. Then, grab a wire brush to clean the gate’s edge marks and chinks.
Next, it’s time to prep your gate for a repaint. Use a primer before painting your gate to help to prevent any runs-off and transfer of chemicals from one surface to another. Regardless of what type of primer you use, make sure it’s water-based and soluble in water.
Once you’ve applied your primer, paint your gate using high-quality, weather-resistant paint that won’t flake, chip, or scab over time. When it comes to painting your gate, match the color of your primer so that the two colors have a good match.
Seal up any openings to keep moisture out
Even though a window air conditioner might be able to keep your exterior dry, it won’t be able to keep your interior dry. The same goes for your gate. If you leave an open gate, it will collect whatever moisture is in the air and drip into your yard.
Over time, this will lead to water damage and a leaky gate. Gate Repairs Sydney finds this as a common phenomenon when they repair old gates.
To keep your gate from getting waterlogged, you need to seal up any small gaps or openings where water gets in. It includes water-slogging gutters, spouts, hoses, and other pipe-like openings.
Use a caulking gun or a caulking wand to apply an even coating of silicone pipe caulking to all small openings and gaps in your gate.
Protect the paintwork from UV rays with a coat of varnish
If your gate’s paint shows signs of wear and tear, it’s time to give it a light coat of varnish. If your gate is aluminum, the varnish shouldn’t be applied to the surface.
Instead, use a soft cloth to apply the varnish to the inside of the gate. Line the inside of the gate with a damp cloth. By doing so, the varnish is completely covered, and pooling water underneath the gate is reduced. Allow the varnish to dry thoroughly before using a squeegee to remove excess water.
Keep Gates Clean and Dry
You should clean your gate thoroughly after heavy rains, but you also need to clean it when it’s drizzling or snowing.
These are the perfect moment to clean your gate as most of the water will have been washed away by the rain.
If it’s not too heavy with rain or snow, you can also use a mild soapy water mix to clean your gate. Please take this as a great reminder to wash your gate when it gets dirty.
If you’re having trouble keeping your gate clean, it may be worth investing in a cleaning screen to help you out. These are available in various designs and are often used in conjunction with dog parks to keep dogs from getting into plants or other valuables.
Use the Right Tools for the Job
When it comes to keeping your gate looking new, the tools you use affect your chances of achieving good results.
Gates and other metal structures always require special attention. This holds true for windows with metal frames. That’s why Window cleaners Sydney choose the effective tools to remove metal rust.
They often have small gaps and crevices that can allow for corrosion. If your gate is made from metals, you need to use a combination of tools and practices to keep your gate looking great. Look for brass-plated gates to help to prevent any copper build-up.
You can also look for plastic-backed vents that will help to keep your gate from getting too hot or humid.
Your gate looks great, but it’s still a long way to go before it’s perfect. Use these tips to get it looking its best and protect your investment. Washing your gate with soap and water is key to keeping it looking new.
Please get to know your gate’s surface conditions and clean it with mild steel wool. Wash any excess liquid from the paint with mild steel wool. Line the bottom of your hose with a wet cloth and gently wring the water out of the gate.
Use a primer before painting your gate to help to prevent any runs-off and transfer of chemicals from one surface to another. Apply a sealant to protect your gate from the elements and keep it clean and dry. Don’t forget to clean your gate regularly and protect it from the elements.